Click the list on the right to see the descriptions.
Designer rear mud guard
The rear mud guard and sari guard are designed to coordinate visually with the rear fender and they are attached to the swing arm. The sari guard is designed to blend into the overall styling of the rear assembly with its dynamic rearward thrust. This creates a good harmony of sportiness and utility.
A double horn with larger volume and sound quality is adopted.
Exhaust System Design
Exhaust system design contributing to the high performance image. The angle at which the silencer is mounted accentuates the feeling of upward thrust toward the rear. The newly designed silencer protector adds cadence to overall styling. It adopts a carbon-look pattern on the surface as well as a model nameplate to add to the high-performance image and the feeling of quality. The design of the end cap is also new.
New-design 5-spoke type wheels
Newly designed cast wheels are adopted front and rear. The design creates a 5-spoke image by grouping the ten thinner spokes two by two to form five pairs. This design achieves the necessary strength balance while creating a sense of lightness at the same time.
Large 220 mm diameter - Rear disc brake
A larger 220mm diameter rear disc brake has been adopted to achieve a better balance with the new rear tire size and ensure good braking power and operability. This larger disc is coupled with the piston-slide type single-pot caliper.
New tail cowl
The exterior parts from the side to the tail cowl have been designed to create a dynamic leaping appearance toward the rear that gives a sense of cadence to the body lines. A dynamic line of carbon coloring is added along the fuel tank and lower edge of the seat that accentuates the mechanical look.
New-design middle cowl
The newly designed middle cowl features improved aerodynamic performance at higher speeds while also giving a more dynamic look to the body styling. The aerodynamic resistance value is 4% better than that on the existing YZF-R15 version 2.0 for improved high-speed performance.
The new cowl is characterized by a layered structure and is designed to actively draw in airflow for cooling effect, while also contributing to rider comfort by directing the outflow away with greater efficiency.
LED taillights adds cadence to the styling. Long-life LED lamps are adopted to help create a rear view suggestive of the super sport class YZF-R6 model.
Wider Radial Rear Tyre
With a width of 130 mm, the rear tire adds to the sense of machine volume A radial tire is a tire formed around a “carcass” consisting of a radial ply with cords that run in a perpendicular to rolling direction, as if “radiating” out from the center of the tire to the two rims.
The advantages of a radial tire are: (1) a high level of rigidity that reduces excessive flexing of the tread and increases grip and (2) reduced rolling resistance that contributes to better fuel economy.
The rubber compound and tread pattern, the crossing angle of the belts and the amount of turn-up in the radial carcass are designed for the optimum mutual balance to achieve excellent handling characteristics.
A separate-section seat enables a better feeling of seat grip in sporty riding. This new seat design features a slip-resistant seat cover material, excellent cushion qualities, optimized shape for the inner thigh contact area and the cushioned front edge of the rear seat that supports the rider’s rear.
The 800mm seat height lets the rider maintain a more relaxed riding posture, while the shape of the area that contacts the rider’s inner thighs has been shaped to provide easy leg reach to the ground. The design also features a storage compartment under the rear seat for holding things like tools and documents.
First Indian made model with aluminium long rear arm which improves handling in the turns. It has a truss structure that enables greater rigidity. This rear arm is cast in one piece by the gravity casting technique that enables a quality cast with great freedom in sectional thickness.
The chain adjustment assembly at the end of the rear arm is the same type used on Super sports models to improve adjustment capability.
The long swing arm design is a feature fed back from Yamaha’s YZR-M1 MotoGP race machine and it is effective for ensuring outstanding rear tire traction. It serves to minimize excessive chassis movement when drive force is applied and is thus effective in stabilizing the machine.
Linked type Monocross suspension
YZF-R15 version 2.0 is equipped with a linked type monocross suspension that delivers a comfortable ride and a cushioning performance that is less prone to bottoming out. In particular, it reduces annoying “sinking” when riding tandem.
The linked monocross suspension consists of a link mechanism sandwiched between the rear arm and cushion unit to create changes in the lever ratio based on the lever effect. When the shock absorber is almost fully extended, the lever ratio is high and therefore the spring is soft, and the damper works softly as well. As the shock absorber strokes in, the lever ratio gradually decreases and the spring rate increases. Eventually, when it is nearly fully stroked in, the lever ratio becomes small and the spring becomes hard and strong. The damper also becomes hard. By making changes to the lever ratio in this way, we were able to achieve soft riding comfort as well as excellent damping under intense load conditions.
The optimization of the frame and rear arm rigidity of the Deltabox Frame combined with the effects of the linked type monocross suspension achieve good riding comfort, agile handling, and turnability, hardly ever causing bottoming out.
As the heir to the YAMAHA R series, YZF-R15 version 2.0 has inherited the series’ agile handling performance.
The frame, which forms the basis for riding comfort and handling performance, is a Deltabox frame which delivers superior rigidity balance.
This frame was designed to provide the best balance in longitudinal, lateral, and torsional rigidity. The synergy created by optimizing each dimension delivers a solid riding feel as well as comfort and agile riding performance.
The Deltabox frame was commercialized based on the experience and know-how accumulated through YAMAHA’s involvement in Moto GP since the early 1980s. This type of frame is currently used in YAMAHA’s R series of sport models. The engine is mounted on rigid supports; one on the head side and two on the case side; so that the engine itself becomes a structural member contributing to body strength and rigidity. The engine’s low vibration makes rigid supports possible, ensuring low vibrations and excellent balance of rigidity. Torsional rigidity refers to the frame’s resistance to deformation when a twisting force is applied to the pivot with the frame’s head pipe held in place.
Fuel injection is used to ensure excellent fuel efficiency as well as environmental friendliness.
The two components of the fuel injection mechanism used in YZF-R15 version 2.0, a) the sensors that gather information on the engine’s operation, and b) the fuel supply system that supplies gasoline, have both been designed to be lightweight and simple. The sensor component uses only 4 sensors (Red blinking points) to gather large amounts of information relating to engine operations, which is sent to a small 26-pin ECU, which in turn calculates the optimum fuel supply. The fuel supply component consists of a small, fuel pump, modularized regulator and filter, and a small injector, all of which come together to enable a lightweight, compact form. The injector injects finely atomized spray of fuel through 6 hole type injectors.
In order to maximize the efficiency of the fuel injector, which injects the optimum amount of fuel for different amounts of intake air, YZF-R15 version 2.0 is equipped with a large 3-liter air cleaner. The duct area of the intake duct was designed optimally to optimize the flow of intake air.
Additionally, the use of a 4-valve combustion chamber (a combustion chamber with 2 intake and exhaust valves each) has allowed designers to layout the spark plug at the center of the combustion chamber for better flame propagation. This also increases the total valve area relative to the 2-valve chambers for improved intake/exhaust efficiency (volumetric efficiency). YZF-R15 version 2.0 is fitted with a hemispherical 4-valve combustion chamber, a configuration that allows intake and exhaust valves to be laid out in the smallest size possible.
In addition, the intake and exhaust valve angles have been kept small to achieve optimum combustion chamber configuration. We also aimed at minimizing the surface area/volume ration (S/V ratio) in the combustion chamber, which is key to improving fuel efficiency. In conjunction with the fuel injection system, this combustion chamber contributes to comfortable riding during long-distance rides as well as during medium to high-speed riding.
YZF-R15 version 2.0’s engine delivers excellent response, fuel economy, is environmentally friendly and a comfortable ride.
The DiASil Cylinder was born from YAMAHA’s world-class aluminum die casting technology.
DiASil Cylinders are all-aluminum cylinders made by YAMAHA’s proprietary aluminum die casting technology. An aluminum alloy with 20% silicon content is used to create a very hard, reliable cylinder surface, making conventional iron sleeves obsolete. As a result, the entire cylinder can be made of aluminum, a better conductor of heat, which means the cylinder delivers better heat dissipation and less weight. (Aluminum’s heat conductivity is 3.1 times that of iron.) YZF-R15 is equipped with this all-aluminum cylinder called the DiASil Cylinder and a forged piston, the same type of piston used in YAMAHA’s supersport bikes.
The fact that both the piston and cylinder of YZF-R15 version 2.0 are all-aluminum ensures excellent heat dissipation, eliminates heat-induced engine power loss, and helps improve fuel efficiency. The DiASil Cylinder is given a special surface treatment to prevent oil evaporation from the cylinder’s surface and improve oil consumption. The cylinder also has excellent hardness and is considerably resistant to wear compared to conventional iron sleeves.
Additionally, the piston is made in a forging process, the optimum way of achieving lightweight designs.The reciprocating mass with the forged piston is approximately 20% less ( according to Yamaha test ) than with an engine of the same displacement fitted with a conventional cast aluminum piston. Resulting in an invigorating feeling when revving up. Conventional pistons are typically made in a casting process where molten aluminum is cast in a mold. YAMAHA developed its proprietary “controlled forging technology” in 1997, which enables mass production of forged aluminum pistons. These pistons have been used in sport models such as the R series. The same manufacturing process was used to develop YZF-R15 version 2.0. Forged pistons retain the excellent strength of aluminum alloys because the metallurgic matrix of aluminum is not affected during the fabrication process. Therefore, the piston can be made lighter and thinner.
YZF-R15 version 2.0 is packed with state-of-the-art technology that is used in the world’s supersport bikes.
First Indian made model with cooled Engine. Liquid Cooled Engine provide stable performance, reduce vibrations, and offer a high quality ride.
The benefits of using this method include stable performance during long-distance, high-speed riding and hill climbing. A liquid-cooled engine does not need heat-dissipating fins and therefore the engine is able to deliver its best performance without being affected by temperature. Additionally, because the head and cylinder are enclosed in a water jacket, mechanical noise from the engine is reduced dramatically. The newly developed engine delivers agile riding performance, and excellent performance on straight stretches of road as well as on winding roads. YZF-R15 version 2.0 also delivers excellent environmental performance. These traits are a must for an “urban supersport.” The ride is unprecedented in terms of both excitement and quality.
subject to change without notice.
Please read your Owner's Manual and all labels before operation.